Swan piston compressor, Xingchang Pneumatic Machinery (certified), the compressor is provided by Xingchang Pneumatic Machinery Co., Ltd. Qingdao. Qingdao Xingchang Pneumatic Machinery Co., Ltd. (www.xckyj.com) is specialized in the "screw air compressor, high-speed centrifugal compressors, compressed air systems, piston engine, gas tank," the business, the company adhering to the "integrity management, intentions of service "concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Cui Junbo. For maintenance or repair in a state ready to start the air compressor must be especially careful. Work on the circuit device air compressor should be carried out by a qualified electrician. Can not perform any work on the components and devices with current. If you have special case, refer to the German national standard DIN VDE 0105 related regulations. Maintenance and repair work can only use Boge company produced the original spare parts, compressor oil and other materials used. The operator shall have the daily operations of external damage occurring in air compressor responsibility to check the air compressor and defects, and when there are changes (including the operating conditions), you must notify the staff immediately after a power outage shut down the air compressor swan air compressors, automatic re-opening starter (AWAL) take effect if Germany BOGE air compressor, the machine will automatically start after re-energized. 5 = oil separator acts as the final separation of compressed air in the remaining oil. 6 = minimum pressure and non-reflux valve in the system pressure rose to 3.5, the valve opens, from the accelerate the formation of the system pressure and ensure that the role of lubrication startup phase. On the other hand, after the air compressor off, no reflux valve prevents air from outside the machine to the gas pipeline compressor back. 7 = cooler air from the cooling of role cooling process, moisture contained in the compressed air into the condensate outflow. 8 = a hand brake the hand brake can be isolated using an air compressor and a pipeline outside the machine.