④ cyclone (gas-water separator) is a kind of inertia cyclone separator, high-speed centrifuges, used more gas-solid separation. Compressed air along the tube wall tangential direction into the separator, which is generated in the rotation, mixed water droplets in a gas along with them to rotate and the centrifugal force, the centrifugal force produced by a large mass of water droplets, large droplets move towards the outer wall by centrifugal force, hit the outer wall (and guard) and then separated from the gas gathering and grew. Second, good breathing, long life 1. Security grille from the wall a distance of about 30 cm above the surface of the safety grille compressor cooling surface, if away from the wall can not be too effective heat dissipation, the latest high-speed centrifuges, should be more than 30 cm distance from the wall. 2. Avoid multi-machine side by side as one of the cooling air compressor cooling methods, assumptions ABC side compressor, air compressor A heat emissions during operation, is sucked compressor B; and C compressor is sucked hot air compressor B emissions, high-speed centrifuge Qingdao, compressor body temperature ratio of C> B> A, if more machines side by side, Xingchang high-speed centrifuge, in addition to the compressed air in the first place outside the machine, the rest are unable compressor cooling air, the more the latter temperature higher placement. German high-speed centrifuges, Xingchang Pneumatic Machinery (certified), high-speed centrifuges by Xingchang Pneumatic Machinery Co., Ltd Qingdao. Qingdao Xingchang Pneumatic Machinery Co., Ltd. (www.xckyj.com) is the leader in Qingdao, industry-specific equipment, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Xingchang Pneumatic Machinery leadership with the staff warmly welcome all inquiries negotiations to create Xingchang Pneumatic Machinery better future.